It is located under the owners driver's dodge side dash and is labeled "hood".
Use one hand to manual stabilize the dakota funnel to help prevent spills.
For more information, see the manual American Petroleum Institute's manual web page on used motor oil collection and recycling.
55 4, instrument panel AND controls. .Re-align the oil filter and try again.Wipe off the engine's oil filter gasket face with a clean rag or towel.Push the hood release latch towards the driver's side of the car and lift the hood open.It is on the front driver's side of the engine bay and will have an oil can symbol.Take your old oil and filter to a recycling facility.Only tighten the drain plug until dodge it is snug.Over-tightening the oil drain plug can strip the threads or crack the oil pan.219 8, maintenance schedules. .If the filter is difficult to turn at the beginning of its threads, stop!Place your old oil filter face down in your oil drain pan and allow 12-24 hours dakota for all the oil to drain out.Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debris on the filter's gasket.Position an oil drain pan below the oil drain plug so that it will catch the oil as it drains out of the oil pan. Use visual a 16 mm socket driver wrench or box bengali end wrench to turn the oil aufgaben drain plug counter-clockwise until it is loose.
Re-insert the oil drain plug and turn it clockwise by dodge hand as far as possible.
It education is on the bottom side of the engine, towards the driver's side of the truck and behind the front bumper.
Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.